Wire winding machine refers to the machinery that coil the wire on the conductor reel. The most representative ones are electric control cable winding machine, bell cover type winding machine and microcomputer controlled hydraulic winding machine. Firstly, the cable drum is put on the frame to make it well meshed with the transmission part, and the shaking top cone is fixed and fastened, so as to effectively prevent the swing during operation and irregular winding line; Then check whether the parts are in good condition and reliably grounded. After checking, fix any end of the cable that has been numbered on the drum axle. After power is turned on, press the triple start button, and the cable will be wrapped in the cable drum automatically and orderly.